當前位置：上海基帶通訊科技有限公司>>>>級—3 GHz 雙向RF模擬光纖收發模塊

級—3 GHz 雙向RF模擬光纖收發模塊

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號OFW-2320TRX

品牌

廠商性質代理商

所在地上海市

在線詢價收藏產品查看聯系電話

聯系方式：樊立群查看聯系方式

更新時間：2021-06-01 21:06:24瀏覽次數：561次

聯系我時，請告知來自智慧城市網

產品分類 品牌分類

  EVERTZ 產品系列

延時器

EVERTZ電視臺周邊產品

EVERTZ多畫面顯示系統

evertz光傳輸產品
  standard系列
  光發射機
  光端機
  編碼譯碼器
  編碼器
  ARTEL 產品系列

編碼器

視頻保護開關

密集型光復用器

D解復用器

暫無信息

上海基帶通訊科技有限公司

經營模式：代理商

商鋪產品：65條

所在地區：上海上海市

聯系人：樊立群（銷售部）

詢價 給他留言

產品簡介

OFW-2320TRX 級—3 GHz 雙向RF模擬光纖收發模塊

詳細介紹

The OFW-2320TRX RF Fiber Optic Transceiver is the principle hardware for long-haul transmission of RF signals in the frequency range of 100 MHz to 2500 MHz over singlemode fiber optic cable. The OFW-2320TRX is designed to provide full duplex signal transmission between an antenna head-end and radio base station complex interconnected with as much as 50 km of optical cabling. The OFW-2320TRX is compatible with various radio transceivers and can replace the conventional RF Coax Cables that interconnect the transceivers to their respective antennas. The system function is independent of the RF carrier's data modulation format. The links have low noise and high dynamic range characteristics, a wide operating temperature range and provide turnkey installation. The system provides status monitoring through the use of an onboard processor that communicates with a host computer over a RS-232 or RS-485 I/O interface.

A typical antenna installation configuration would resemble an architecture where the OFW-2320TRX remote unit is installed such that it is interconnected to the Antenna via an uplink/downlink duplexer. Specifically, the uplink optical channel connects to the Power Amplifier （PA）, the downlink optical channel connects to the Low Noise Amplifier （LNA）. Similarly, the base station installation configuration would resemble an architecture where the OFW-2320TRX uplink and downlink optical channels are mated to the radio transceivers. With the addition of an optional WDM module will enable the system to have bi-directional uplink/downlink transmission over a single fiber optic cable.

Applications：

◆Wideband RF Transmission

◆Antenna Remoting

◆Trunking Radio

◆L-Band SATCOM

◆GPS

◆Wireless/ PCS

Features：

◆WDM Compatible

◆Wide Bandwidth, 1 MHz to 2250 MHz

◆High Dynamic Range

◆Low Noise Laser Diode

◆RS-232 or RS-485 Data Port （opt）

◆1 Year Full, 2 Year Limited Warranty

Optical Parameters：

Spec	Value
Operating Wavelength	1200 nm to 1600 nm
Input Level （Max）	+5 dBm
Responsivity （min）	0.85A/W@1310 nm, 0.90 A/W @ 1550 nm
Input Backreflection	-55dB to -63 dB
Opt Fault Threshold	Factory preset to -12 dBm

RF Channel ：

Spec	Value
Bandwidth	1 MHz to 3000 MHz
Gain （min）	28.0 dB
Flatness （max）	+/- 1.0 dB
1 dB Comp. Level （min）	18.0 dBm
OIP-3 （min） @ 2x0 dBm	28.0 dBm
Noise Figure （max）	3.0 dB